Hyundai H50CV-A Original Instructions Manual page 2

IMPORTANT NOTICE
THINGS TO DO BEFORE OPERATING
YOUR NEW COMPRESSOR FOR THE
FIRST TIME
1. On the top front of the compressor you will find a white plastic shipping plug
inserted into the oli filler hole, Remove the shipping plug and replace by pressing
the red oil filler plug(Supplied in the parts bag) into the oil filler hole.
2. Also, supplied in the parts bag you will find a black air breather assembly.Screw
the assembly into the hole on the side and at the top of the compressor head.
3. Using the sight-glass built into the lower front area of the compressor (just behind
the regulator), check the oil level. It should be at the halfway mark on the sight-
glass for normal operation, If it is necessary to add oil,please use any standard
air compressor oil available at home centers and other major retailers.
4. There are two air outlet fittings on the regulator.
Air flow for one fitting is operated by turning the regulator handle. The other is a
free flow directly from the tank.Screw either a metal cap or a quick-coupler (not
supplied) onto the free-flowing fitting before starting the compressor.Use nylon
thread-seal tape when working with air fittings to prevent leakage.
2