Table of Contents
Advertisement
User Setup: Service Filter
These setup steps allow the user to monitor FAN runtimes and program
service alerts. Service alerts appear on the display. If the thermostat is joined
to a Skyport account, then the user may be alerted by Skyport Cloud Services
when to change the filter.
FAN
Press and hold FAN
to clear reset runtime.
Service Filter Runtime (Setup Steps 20-23)
Filter Runtime (Setup Step 20) - This counter
keeps track of the number of hours of fan
runtime in the Heating mode, Cooling mode,
and in stand alone Fan operation. Press FAN
to reset.
Filter Runtime (Setup Step 21) - This counter
displays the total number of calendar days
that have elapsed since the counter was reset
to help the user track Fan runtime. Press FAN
to reset.
Service Filter Alert Hours (Setup Step 22) - This
timer allows the user to specify the number
of hours the fan will run before the "Replace
Filter" alert will be displayed. Press COOLER
continuously until OFF is displayed to disable
this alert.
Service Filter Alert Days (Setup Step 23) - This
timer allows the user to specify the number
of calendar days that will elapse before the
"Replace Filter" alert will be displayed. Press
COOLER continuously until OFF is displayed
to disable this feature.
Runtime hours
or days appear in
the clock display.
24
Advertisement
Table of Contents
