Table of Contents
Advertisement
User Setup
Setting the Clock and Day (setup step 1 & 2)
When your thermostat is connected to Skyport Cloud Services, the time
and day of the week are controlled by Skyport. There is no local adjustment,
Skyport also adjusts the time for Daylight Savings Time as well.
To set the time and day when not connected to Skyport; enter the setup
screens by pressing the MODE button and simultaneously pressing the
FAN button for 5 seconds.
Clock (Setup Step 1) adjusts the clock.
Use the Warmer/Up or Cooler/Down
buttons to adjust the time. Press the MODE
button to advance to step 2.
Week Day (Setup Step 2)
Select the day of the week using the
Warmer/Up or Cooler/Down buttons.
Leave the setup screens by again pressing
the MODE button and simultaneously
pressing the FAN button for 5 seconds.
Show Clock (Setup Step 3)
This setup step will allow for removal of the
clock and day of the week from the display.
OFF removes the time and day from the
display.
18
Advertisement
Table of Contents
