Accessory Confi Guration; Air Filter; Humidifi Er; Uv Lamp - ClimateMaster ATC32U01 iGate Installation Manual

AT C 3 2 U 0 1 C o m m u n i c a t i n g , P r o g r a m m a b l e T h e r m o s t a t - I O M
R e v. : 4 F e b . , 2 0 1 3
3.6.1 MULTI-UNIT AIRFLOW SELECTION
In section 3.1, when an installer selects "Airfl ow
Selection" from the System Confi guration menu,
the installer may choose the unit to confi gure
by the last 4 digits of its serial number from the
following screen.
AIRFLOW SELECTION
TT026
TT026
TT038
PREVIOUS
3.6.2 MULTI-UNIT OPTION SELECTION
In section 3.2, when an installer selects "Option
Selection" from the System Confi guration menu,
the installer may choose the unit to confi gure
by the last 4 digits of its serial number from the
following screen.
OPTION SELECTION
TT026
TT026
TT038
PREVIOUS
3.6.3 MULTI-UNIT, UNIT, PUMP, & VALVE
CONFIGURATION
To confi gure Unit, Pump, and Valve options in
sections 3.3-3.5, the thermostat must be
connected to only one unit at a time.
10
S N - - - - - 1 2 3 4
S N - - - - - 5 6 7 8
S N - - - - - 9 0 1 2
SELECT
S N - - - - - 1 2 3 4
S N - - - - - 5 6 7 8
S N - - - - - 9 0 1 2
SELECT
G e o t h e r m a l H e a t P u m p S y s t e m s
4.0 Accessory Confi guration
A service message will fl ash at the top of the Main screen
when a service timer expires to alert the user that it is time to
service these options. Refer to DXM2 AOM for instructions on
confi guring DIP switches to confi gure accessories. Follow the
instructions below to set service timers.
INSTALLER SETTINGS
THERMOSTAT CONFIG
SYSTEM CONFIG
ACCESSORY CONFIG
INPUT DEALER INFO
HUMIDITY CONFIG
TEMPERATURE ALGORITHM
DEMAND REDUCTION CNFG
SERVICE MODE
RESTORY DEFAULTS
ATC32U01
SELECT OPTION
PREVIOUS
4.1

AIR FILTER

This feature displays an alert to remind the user to change
the air fi lter after the selected time has passed.
Adjust the Air Filter Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off) – valid range: Off, 3
to 48 months (in 3 month increments)
4.2 HUMIDIFIER
This feature displays an alert to remind the user to change
the humidifi er pad after the selected time has passed.
Adjust the Humidifi er Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off) – valid range: Off, 3
to 24 months (in 3 month increments)
4.3

UV LAMP

This feature displays an alert to remind the user to change
the UV lamps after the selected time has passed.
Adjust the UV Lamp Reminder settings using the up/down
arrow buttons. Press the center button to save changes.
• Cumulative Run Time (default Off) – valid range:
Off, 400 to 3600 hours (in 100 hour increments)
• Calendar Time (default Off) – valid range: Off, 3
to 48 months (in 3 month increments)
4.4

AIR CLEANER

This feature displays an alert to remind the user to clean the
fi lter(s) after the selected time has passed.