Table of Contents
Advertisement
Connect to Wi-Fi Overview
Join a Thermostat to Skyport
If the thermostat is connected to the local Wi-Fi access point but not yet
joined to an existing Skyport account, you may join the thermostat to the
account by doing the following:
1. Log in to your Skyport account.
2. Select the "Location" you want to add a thermostat into or select the
"Add a Location" link in the upper left-hand corner.
3. Select the "Add a New Thermostat" box. A screen will 'pop-up'
asking for a six digit code.
4. Press the FAN button on the thermostat for 5 seconds.
5. Press the Warmer button on the thermostat.
6. A six digit code will appear on the thermostat's display.
7. Enter the six digit code into your Skyport account.
Wi-Fi Status Screens
Press and hold the FAN button on the thermostat for 5 seconds. When
"Wi-Fi Setup" appears on the display, press the MODE button. Pressing
the up or down button will display the following information:
• AP Name
• AP Signal Strength
• IP Address
• Skyport Status
• API Status
11
Advertisement
Table of Contents
