Auger Drive Chain - Schulte SDX-117 Operator's Manual

AUGER DRIVE CHAIN

1. Re-tighten the auger drive chain when slack
exceeds 3/4 inch at the center of the bottom
chain section.
2. When Removing/Installing the auger drive
chain, remove rubber plugs and prop the idler
using the bolt provided in the manual canister.
3. When complete, remove the bolt and return to
storage in the manual canister.
4. BE SURE TO REPLACE RUBBER PLUGS.
Leaving the plug holes open will result in
snow entering the chain case potentially
causing premature wear
SDX-117 11/22
© 2022 Alamo Group Inc.
MAINTENANCE
Maintenance Section 5-7