Table of Contents
Advertisement
•
Check that the main driveline is securely
attached to the tractor and the locking collar is
seated in the groove of the PTO Shaft.
•
Check that the snow blower driveline is
securely attached.
•
Inspect that the snow blower pivot pins are the
proper size, correctly installed, and secured to
the tractor lift arms with retaining pins inserted.
OPS-SB-0007 str
When attaching the Implement input driveline to the Tractor PTO, it is important that the
connecting yoke spring activated locking collar slides freely and the locking balls are seated
securely in the groove on the Tractor PTO shaft. Push and pull the driveline back and forth
several times to ensure it is securely attached. A driveline not attached correctly to the
Tractor PTO shaft could come loose and result in personal injury and damage to the
Implement.
•
Ensure fans are in good working condition and
rotate freely..
•
Ensure chute ring is rotating freely.
•
Ensure the driveline integral shields are in
good condition and rotate freely.
•
Inspect that all bolts and screws are in position
and are properly torqued.
•
Check blade wear and if worn reverse it or
replace. OPS-SB-0008_C str
Do not put hands or feet near the rotating fan. Fan contact can result in
serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material,
performing service, and making repairs.
SDX-117 11/22
© 2022 Alamo Group Inc.
OPERATION
(S3PT-17 str)
Operation Section 4-15
(SSB-6)str
Advertisement
Table of Contents
