Table of Contents
Advertisement
Use adequately sized and rated trailers and
equipment to transport the tractor and implement.
Consult an authorized dealer to determine the
proper equipment required.
sized chains, heavy duty straps, cables and/or
binders, securely tie down both the front and rear
of the tractor utilizing the proper tie down locations
as specified by the tractor manufacturer. OPS-U-
0025 str
15.TROUBLESHOOTING GUIDE
Problem
Auger Does Not
Operate
Excessive Power
Required to
Operate Snow
Blower
Tractor Wheel
Slippage
Excessive
Mechanical
Noise
Does Not Throw
Snow
SDX-117 11/22
© 2022 Alamo Group Inc.
OPERATION
Using adequately
Possible Cause
Cross shaft shear bolt broken.
Operating in too high of gear.
Blade scraping ground.
Ballast or traction.
Loose bolts.
Worn universal joint bearings,
Worn bearings.
Check valve installed wrong.
Operation Section 4-36
Remedy
Replace shear bolt.
Gear down tractor.
Adjust skid shoes.
Install chains.
Tighten bolts.
See your dealer.
See your dealer.
Install check valve as shown on parts page.
Advertisement
Table of Contents
