Schulte SDX-117 Operator's Manual page 69

OPERATION
To disconnect the implement, first extend the
tractor 3-point hitch top link to remove tension on
the top link hitch pin. When the pin is loose and
easy to rotate, remove the pin from the
implement. Next remove both lower hitch pins.
Lift and rotate the PTO storage holder into the PTO storage position.
After disconnecting the 3 lift points, remove the
implement driveline from the tractor PTO shaft.
Lay the driveline down carefully to avoid damaging
the driveline or its shield. Do not let the driveline
fall into mud or dirt, which can contaminate the
bearing and shorten the life of the driveline.
SDX-117 11/22 Operation Section 4-29
© 2022 Alamo Group Inc.