Cleaning And Storage - Wilfa BPFD-1680MB Operating Instructions Manual

12

CLEANING AND STORAGE

• Unplug the appliance from the wall outlet.
• Do not immerse the unit base or power cord into water or other liquids.
• Clean surface of the blender jar with soft cloth or sponge. The measuring
cup and the seal ring can be disassembled for cleaning.
• The blender jar can be rinsed with water. It can also be cleaned by filling 2
cups of water in the blender jar, close the lid and then operate the blender
in Pulse mode. Then pour out the water and dry it with soft cloth.
• After cleaning, put the blender jar on the side or upside down to dry.
• Clean the unit base by soft cloth. NEVER immerse it in water or other liquid.
• Note: If the blender jar is put in a upside down position, please remove
the residual water by dry cloth. Do not leave it close to the sink or basin
to avoid water spraying to the bottom part of the jar. This may cause the
rusting of the bearing and hence affecting the performance of the blender.
Caution : The product is for household use only.