Operation - Wilfa BPFD-1680MB Operating Instructions Manual

10

OPERATION

• There is a Jar type sensor on the blender base. When Blender jar is placed
on the unit, all the functions and time controls can be selected. When Sport
bottle is placed on the unit, only Speed and pulse functions are enable.
• Blender jar Intelligent pre-programs mode:
Press key, product will enter Standby mode, select from the panel
run the selected program automatically, after program completed, product
will enter Standby mode automatically.
• Manual control speed and time for Blender jar modes:
In standby mode, touch the
running time (maximum 10 minutes) and speed (1 to 10) then press
and the product will run at the selected speed and time. During motor
running, touch
to Standby mode.
• Start / Stop touch key:
Start /Stop
activate product at the corresponding function. When motor is running,
press key to stop the operation, product will enter Standby mode.
• Manual Pulse:
is the Pulse mode, have to press and hold to activate. Motor will stop
when user release the finger. When pressed the motor will run at highest
speed. After release the product will return to Standby mode.
• Power saving mode:
When product is in Standby mode and kept idle for 3 minutes without any
operation, product will turn to Power Saving mode.
• The 6 Intelligent Pre-programs for Blender jar mode
any one of the pre-program, then press
key to stop the motor at any time, then product will return
key: need to select a pre-program then press
key, product will
and to select the desired
key
key to