Before First Use; Using The Appliance; Cleaning - Wilfa DAILY DBL-1200B Instruction Manual

BEFORE FIRST USE

Clean the unit and parts thoroughly before you use the appliance for the first
time.

USING THE APPLIANCE

• There is a jar sensor on the blender base. When blender jar is placed on the
unit, all the functions can be selected.
• Make sure the indicator is set to 0 when you start the blender.
• Put the desired ingredients into the jug.
• Mount the lid onto the jug and insert the lid cap.
• Select speed manually by turning the knob anti-clockwise from 1-5.
• Pulse: Turn the knob clockwise to P and hold for as long as needed.
Note: It is recommended to cut food into smaller pieces before putting them in
the jar. Do not operate with large quantities of food at one time.

CLEANING

Note: Always clean the removable parts immediately after use.
Note: Be careful when cleaning the parts. Avoid touching the sharp blades!
• Disconnect the power from main supply.
• Disassemble all removable parts before cleaning.
• Clean all removable parts in lukewarm water with dishwashing liquid.
• The blender jug can be rinsed with water. It can also be cleaned by pouring
warm water into the jug with a few drops of dishwashing liquid, and pulse until
it looks clean. Pour out the water, rinse and dry with a soft cloth.
• Use dry cloth to clean the main body.
BLENDER · DBL-1200B
9
EN