SMC Networks ZSE10(F) Operation Manual page 41

Press the
The copy source Pressure switch
Sending/
Receiving
Copy
completed
Press the
button.
The copy can be made continuously and
the copy ready status can be held even if
the power supply is turned off.
To complete the copy function,
press the and buttons
simultaneously for 1 second or longer.
∗: If the copy to the copy destination Pressure switch is not completed, it is detected as a copy function sending/receiving error.
Press the and buttons simultaneously for 1 second or longer to return to measurement mode. Then, check the wiring and
specifications of the switch and retry copy function.
The copy ready status is held even if the power
supply is turned off.
button to start copying.
Flashing
(Red)
Setting of [F97] Copy function completed
-40-
The copy destination Pressure switch
Press the and
buttons simultaneously
for 1 second or longer.
Flashing
(Red)
Press the button.
No.PS※※-OMM0005-J