SMC Networks ZSE10(F) Operation Manual page 17

○Removal and mounting on DIN rail
•It is necessary to prepare a DIN rail adapter for the mounting on the DIN rail. (Model: ZS-39-R)
•Take care not to bend the claws of the DIN rail adapter when mounting.
<Mounting on DIN rail adapter>
Engage the Pressure switch with claw 2 of the DIN rail adapter, then press down on to claw 1until it
clicks.
<Mounting on DIN rail>
Engage claw 1 of the adapter on to the DIN rail as shown [1], apply force in direction [2], then press
downward [3] until claw 2 clicks on to the DIN rail.
<Removal from DIN rail>
Move in the direction [1], and remove claw 1 in direction [2] as shown.
-16-
No.PS※※-OMM0005-J