Remote Upgrade - HIKVISION DS-9516NI-S-1TB User Manual

Click "Add" to add user.
Note:
If you set the IP address or physical address, and then
only the PC with the same IP address or physical address can
visit the device through network.
Note:
Local PTZ Control: Locally control PTZ cameras.
Local Manual Record: Locally start and stop manual recording on any of the channels.
Local Playback: Locally play recorded files that are on the NVR.
Local Parameters Settings: Configure the settings, restore to default settings, import/export configuration file.
Local Log Query: Search and view logs of NVR.
Local Advanced Operation: HDD management (including the initialization and changing the properties of a
disk). Ability to update system firmware as well as to stop the relay output.
Local Camera Management: Enable and disable analog channels. Ability to add and delete IP cameras.
Local Backup: Locally backup recorded files from any of the channels.
Local Shutdown/Reboot: Shutdown or reboot the NVR.
Remote PTZ Control: Remotely control PTZ cameras.
Remote Manual Record: Remotely start and stop manual recording on any of the channels.
Remote Playback: Remotely play and download recorded files that are on the NVR.
Remote Configuration: Remotely configure parameters, restore parameters to factory defaults and import
settings to as well as export settings from NVR.
Remote Log Search: Remotely view logs that are saved on the NVR.
Remote Advanced Operation: Remotely manage hard disk drives (initializing and setting properties for HDDs).
Ability to remote update system firmware and stop of the relay output.
Voice Talking: Ability to use two-way radio between the remote client and the NVR.
Remote preview: Select and view live video over the network.
Remote Alarm Control: Remote alert or control the relay output of the NVR. Alarm and exception settings must
be configured properly to upload to host.
Remote Video Output Control: Send remote button control signal.
Remote Serial Port Control: Configure settings for RS232 and RS485 ports.
Remote Camera Management: Remotely enable and disable analog channels. Add and delete IP cameras.
Remote Shutdown/Reboot: Remotely shutdown or reboot the NVR.

9.8 Remote Upgrade

Remote Upgrade:
Click
Click "Browse" to search the local upgrade file, click
"Upgrade" to start upgrade remotely.
55