Advertisement
LAN Configuration
LAN Configuration
LAN Configuration
IP Camera
IP Camera
IP Camera
The camera can be accessed on the local network either using the
The camera can be accessed on the local network either using the
The camera can be accessed on the local network either using the
IP-Tool or directly in a web browser.
IP-Tool or directly in a web browser.
IP-Tool or directly in a web browser.
Accessing the Camera Using the IP-Tool
Accessing the Camera Using the IP-Tool
Accessing the Camera Using the IP-Tool
1. Make sure the camera and PC are connected to the LAN.
1. Make sure the camera and PC are connected to the LAN.
1. Make sure the camera and PC are connected to the LAN.
2. Locate the IP-Tool installer at www.vitekcctv.com/Downloads/Soft-
2. Locate the IP-Tool installer at www.vitekcctv.com/Downloads/Soft-
2. Locate the IP-Tool installer at www.vitekcctv.com/Downloads/Soft-
ware/Transcendent-IPTool_v2.0.2.zip, then install on the PC. Open
ware/Transcendent-IPTool_v2.0.2.zip, then install on the PC. Open
ware/Transcendent-IPTool_v2.0.2.zip, then install on the PC. Open
the installed application.
the installed application.
the installed application.
3. Modify the IP address. The default IP address is 192.168.226.201.
3. Modify the IP address. The default IP address is 192.168.226.201.
3. Modify the IP address. The default IP address is 192.168.226.201.
Click the information of the camera listed in the above table to show
Click the information of the camera listed in the above table to show
Click the information of the camera listed in the above table to show
the network information on the right side. Modify the IP address and
the network information on the right side. Modify the IP address and
the network information on the right side. Modify the IP address and
gateway of the camera and make sure its network address is in the
gateway of the camera and make sure its network address is in the
gateway of the camera and make sure its network address is in the
same local network segment as the computer's. Please modify the
same local network segment as the computer's. Please modify the
same local network segment as the computer's. Please modify the
IP address of your device according to the practical situation.
IP address of your device according to the practical situation.
IP address of your device according to the practical situation.
For example, the IP address of your computer
For example, the IP address of your computer
For example, the IP address of your computer
is 192.168.13.4. So the IP address of the
is 192.168.13.4. So the IP address of the
is 192.168.13.4. So the IP address of the
camera shall be changed to 192.168.13.X.
camera shall be changed to 192.168.13.X.
camera shall be changed to 192.168.13.X.
After modification, please input the password
After modification, please input the password
After modification, please input the password
of the administrator and click "Modify" button
of the administrator and click "Modify" button
of the administrator and click "Modify" button
to modify the setting.
to modify the setting.
to modify the setting.
** Default admin password: "123456".
** Default admin password: "123456".
** Default admin password: "123456".
Switch
Switch
Switch
Network Cable
Network Cable
Network Cable
Router
Router
Router
Network Cable
Network Cable
Network Cable
5
MENU
MENU
MENU
Computer
Computer
Computer
Advertisement
