[Remote2 Mode]; [Function Button]; [Date And Time] - Panasonic PT-DW830E Operating Instructions (Functional Manual)

Hide thumbs Also See for PT-DW830E:
Table of Contents

Advertisement

2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE]
[10MIN.] - [90MIN.]

[REMOTE2 MODE]

You can set the <REMOTE 2 IN> terminal.
1)
Press as to select [REMOTE2 MODE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
[L6500 SERIES]
f When [USER] is selected, proceed to Step 3).
3)
Press the <ENTER> button.
4)
Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the functions of the <FUNCTION> button on the remote control.
1)
Press as to select [FUNCTION BUTTON].
2)
Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3)
Press as to select a function.
[DISABLE]
[P IN P]
[SUB MEMORY]
[SYSTEM SELECTOR]
[SYSTEM DAYLIGHT VIEW]
[FREEZE]
[WAVEFORM MONITOR]
[LEFT/RIGHT SWAP]
[ASPECT]
4)
Press the <ENTER> button.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables the No signal shut-off function.
Allows you to set in ten minutes intervals.
The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the
projector.
Used to change the setting of the <REMOTE 2 IN> terminal.
The setting of <REMOTE 2 IN> terminal is used for the L6500 series compatibility.
Disables the <FUNCTION> button.
Switches the [P IN P] setting to [OFF], [USER1], [USER2], or [USER3]. (x page 124)
Displays the sub memory list. (x page 129)
Switches the [SYSTEM SELECTOR] setting. (x page 76)
Switches the [SYSTEM DAYLIGHT VIEW] setting. (x page 74)
Temporarily pauses the image. (x page 105)
Displays the waveform of the input signal. (x page 105)
Switches the flip horizontal settings. (x page 92)
Switches the aspect setting. (x page 78)
ENGLISH - 121

Advertisement

Table of Contents
loading

Table of Contents