Switching The Image Aspect Ratio; Using The Presentation Timer Function; Using The Function Button - Panasonic PT-TMZ400 Operating Instructions Manual

Chapter 3 Basic Operations - Operating with the remote control
Note
f The magnification is not displayed in the moving screen.
f The digital zoom function is canceled if the input signal changes during a digital zoom.
f During a digital zoom, the freeze function is disabled.
f The digital zoom function may not work properly for some computer signals.

Switching the image aspect ratio

Switch the image aspect ratio according to the input.
button
1) Press the <ASPECT> button.
f The setting will change each time you press the button.
Note
f Refer to the [POSITION] menu → [ASPECT] (x page 74) for details.

Using the presentation timer function

The presentation timer can be operated.
The presentation can be performed while confirming the elapsed time or remaining time against the specified
time.
button
1) Press the <P-TIMER> button.
f The count is started.
2) Press the <P-TIMER> button again.
f The count is stopped.
Note
f The elapsed time or the remaining time is displayed at the lower right of the projected image when using the presentation timer function.
f The count will be resumed from interruption when the <P-TIMER> button is pressed.
f The presentation timer function will be terminated by pressing the <P-TIMER> button for over three seconds.
f For details about the setting of the presentation timer function, refer to the [DISPLAY OPTION] menu → [P-TIMER]. (x page 80)

Using the FUNCTION button

Some frequently used menu items can be assigned to the <FUNCTION> button on the remote control so that it
can be used as an shortcut button.
button
1) Press the <FUNCTION> button.
a button
ABC
q button
ABC
ABC
▼ button
ABC
Screen display position after the button operation
w button
ABC
ENGLISH - 55