SMC Networks ISA3-GCP-M1LB-L1 Operation Manual page 56

○
[F90]Setting of all functions
The setting of all functions in function selection mode is available.
<Operation>
●Order of function settings
Order
1 [Uni] Setting of pressure value units.
2 [P_1] Switch point
3 [H_1] Hysteresis
4 [CoL] Setting display colour.
5 [oU2]
6 [ ] display value compensation
7 [SUb] Sub screen
8 [dSP] Display OFF mode
9 [P in] Reset to default settings.
Function
-55-
Applicable model
This setting is only available for models with the units
selection function.
All models
All models
All models
∗ : Cannot be set.
Press the button to proceed to the next function.
All models
All models
All models
All models
4 How to use
No.PS※※-OMR0002-K