RGBlink FLEX 16 User Manual page 38

Scale: Set the X, Y, width and height.
Crop: Crop the left, top, width and height.
Display Mode: Select "Live" or "Freeze".
Mirror: Enable or disable the mirror function, default "OFF".
Bypass Mode: Enable or disable the bypass mode. When select "ON", the output format will be the
same with the input format.
Alpha: Set the alpha, the adjustment range is 0~128.
Sharpness: Set the sharpness, the adjustment range is 0~100.
Brightness: Set the brightness, the adjustment range is 0~100.
Contrast: Set the contrast, the adjustment range is 0~100.
Saturation: Set the saturation, the adjustment range is 0~100.
Color Term: Set the color temp (red, green and blue), the adjustment range is 0~100.
Reset: Select "Reset", the input property will be recover to factory setting.
Take
The take interface is shown as the figure below:
Set the transition time, and the adjustment range is 0~10S.
Slide the black out switch to enable or disable the black function. Auto take on is the default state. If
select black out and auto take on, the preview image will black or seamless switch to LED display
instantaneously.
Click "Cut" or "Take", the preview will be cut or seamless switch to LED display.
EDID
Click the EDID shortcut " ", and pop-up window as follows:
FLEX 16 User Manual
37