Server Front Panel Leds And Buttons - HPE Apollo 4510 Gen9 Setup And Installation Manual

Item
1
2
3
4
5

Server front panel LEDs and buttons

Item Description
1 Power On/Standby
button and system power
LED
2 UID button/LED
Description
Drive bay 1
Drive bay 2
Server ejector button
SUV cable connector
Server serial label pull tab
Status
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
Solid amber = System in standby
Off = No power present
Solid blue = Activated
Flashing blue:
• 1 Hz/cycle per sec = Remote management or firmware upgrade
in progress
• 4 Hz/cycle per sec = iLO manual reboot sequence initiated
• 8 Hz/cycle per sec = iLO manual reboot sequence in progress
Off = Deactivated
Table Continued
Identifying components and LEDs 11