Table of Contents
Advertisement
The following procedure guides you to exit the text
message received.
Press the Menu Select button below Exit or
to return to Home screen.
The other operations are the same as normal
dynamic regroup command.
When the radio exits the Geofence area, your radio
reverts to original channel or newly assigned
talkgroup. The radio display shows the new channel
together with Voice Announcement to indicate the
changes. Voice Announcement of the new channel
only works if that channel is configured with Voice
Announcement.
Mission Critical Geofence
This feature allows the radio to use the GPS receiver
to determine radio location at frequent intervals.
This feature also allows the radio to evaluate if the
radio is within the Geofence area in real time.
Check with your dealer or qualified technician to
programme the geofence coordinates and actions.
Entering Mission Critical Geofence
When the radio enters the predefined Geofence area,
the radio displays <Geofence Alias> with intelligent
backlight and the user hears a Voice Announcement.
Zone and channel alias of the Geofence area is
displayed. If the radio is set to manual, the user can
choose either to proceed with zone and channel
change or cancel the change.
The radio then connects to the designated talkgroup.
The radio displays the talkgroup alias and dynamic
regroup tone sounds. The transmit power level
changes and the radio shows a direct text message
content without any user operation.
Note:
Depending on how your radio is programmed,
you may or may not be alerted by Voice
Announcement (VA), TMS display, Intelligent
Backlight, and the Transmit Power Level. The
user will be alerted only if these indicators are
configured in the radio. The VA can be
programmed to alert continuously or
momentarily.
115
English
Advertisement
Table of Contents
