Table of Contents
Advertisement
call received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See
Making a Talkgroup Call
Private Call (Trunking Only)
information on returning the call.
Sending a Call Alert Page
The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Note:
If the feature inactivity timer is enabled, your
radio automatically exits the feature when your
radio is left idle long enough for the time to
expire. You hear the Menu Inactive Exit Tone
upon feature exit.
Sending a call alert page via the preprogrammed
•
Quick Access (One-Touch) Call Alert Paging
button:
on page 56 or
Making a
on page 56 for more
a) Press the preprogrammed Quick Access
(One-Touch) Call Alert Paging button to send
a page to the preprogrammed ID.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen
for Contacts.
Sending a call alert page via the radio menu Page:
•
a)
or to Page.
b) Press the Menu Select button directly below
Page.
c) Press the Menu Select button directly below
Cnts to view the required ID,
required ID.
d) Press the PTT button to send the page.
The display shows Paging...<Number>.
or
to the
75
English
Advertisement
Table of Contents
