Table of Contents
Advertisement
•
Clearing all Bluetooth devices information via the
radio menu Clr:
a)
or
Select button directly below Clr.
You hear a short, medium-pitched tone. The
display shows Clear all BT devices?.
b) Press the Menu Select button directly below
Yes to proceed.
The display shows Please wait to indicate
clearing is in progress.
If successful, the display shows All BT
devices cleared.
If unsuccessful, you hear the radio sounds a
short, low-pitched tone. The display shows
Clear all BT devices failed. The display
returns to Bluetooth feature screen.
Note:
If Re-Pair Timer is set to infinite and you clear
keys on the radio, you must clear keys on all
previously paired devices as well. (Please see
your accessories manual for further details.)
132
English
to Devices and press the Menu
Pairing with LEX Handheld
Ensure that Bluetooth feature of your radio is on and
the Bluetooth tones are enabled.
1 Turn on the handheld and activate the Bluetooth
feature.
2 Place the handheld close to the radio aligning the
Bluetooth Pairing Location on the handheld with
the Bluetooth Pairing Location on the radio.
If the pairing process is successful, you hear an
incremental-pitched tone from the radio. The radio
begins to connect to the handheld. If the
connecting process is successful, you hear an
incremental-pitched tone. The display shows
<Device Friendly Name> connected, and the
Bluetooth icon turns from
If unsuccessful, one of the following scenarios
occur:
•
You hear a short, low-pitched tone and the
display shows Bluetooth pairing failed (if
pairing fails).
•
You hear a decremental-pitched tone and the
display shows <Device Friendly Name>
to
.
Advertisement
Table of Contents
