Each Quick Text message has a maximum length of
50 characters. You can select the required text from
the Quick Text.
1 Perform one of the following actions:
•
To access this feature via a preprogrammed
button, press the preprogrammed Quick Text
button and proceed to Step 4.
•
To access this feature via the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
to Compose and press the Menu
•
or
Select button directly below Sel.
•
Press the Menu Select button directly below
Exit to return to the Home screen.
to Quick Text and press the Menu
4
or
Select button directly below Sel for a predefined
message.
5
or
to scroll through the list of messages and
press the Menu Select button directly below Sel
to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of it.
6 Press the Menu Select button directly below
Optn.
to Send Message and press the Menu
7
or
Select button directly below Sel..
8 Perform one of the following actions:
•
or
to scroll through the address list and
select the required address.
to [Other Recpnt] and press the
•
or
Menu Select button below Edit. When a
blinking cursor appears on the Enter Address
screen.
9 Press the Menu Select button directly below Send
or press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
93
English