Table of Contents
Advertisement
If the radio is receiving a secure transmission, the
LED blinks yellow.
Receiving and Responding to a Talkgroup Call
To receive a call from a group of users, your radio
must be configured as part of that talkgroup.
When you receive a talkgroup call (while on the Home
screen) the radio triggers for your attention with one
of the following scenarios depending on the system
your radio is configured:
•
For ASTRO Conventional system, the LED lights
up solid yellow. The display shows the talkgroup
alias or ID, and the caller alias or ID.
•
For Trunking system, the display shows the caller
alias or ID.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid red.
3 Release the PTT button to listen.
See also
Making a Talkgroup Call
details on making a Talkgroup Call.
54
English
Receiving and Responding to a Private Call (Trunking
Only)
on page 56 for
A Private Call is a call from an individual radio to
another individual radio.
The one-to-one call between the two radios are not
heard by the others in the current talkgroup. The
calling radio automatically verifies that the receiving
radio is active on the system and can display the
caller ID.
Note:
With the inactivity timer enabled (optional),
when there is no response from the receiving
radio, the calling radio exits the call with Menu
Inactive Exit tone after the timer expires.
When you receive a Private Call, you hear two alert
tones and the LED blinks green. The display shows
Call received and the call received icon blinks.
1 Perform one of the following actions:
•
Press the Menu Select button directly below
Resp.
•
Press the Call Response button within 20
seconds after the call indicators begin.
Advertisement
Table of Contents
