NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Disconnect the camera cable from the system board.
2. Remove the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
3. Slide and lift the retractable-camera assembly out of the display-assembly base.
4. Note the routing of the camera cable, and remove it from the routing guides.
5. Press the top of the retractable-camera assembly to extend the retractable camera.
36
Removing the camera
computer. After working inside your computer, follow the instructions in
shield.
Removing the camera
23
After
www.dell.com/