4
Install the following components:
a
System board shield
b
Back cover
c
Stand
5
Follow the procedure in
Pop-Up Camera
Removing the pop-up camera
1
Follow the procedure in
2
Remove the following components:
a
Stand
b
Back cover
c
System board shield
3
To remove the camera assembly:
a
Remove the two screws (M3) that secure the camera assembly cover to the middle frame [1].
b Lift the camera assembly cover away from the middle frame [2].
c
Disconnect the camera cable from the system board and unroute the camera cable from the routing channel [3].
d Remove the two screws (M3) that secure the pop-up camera assembly to the middle frame [4].
e
Slide and lift the pop-up camera assembly off the middle frame [5].
After working inside your
computer.
Before working inside your
computer.
Removing and Installing components
41