NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Slide the fan under the heat sink and place it on the display-assembly base.
2. Align the screw holes on the fan with the screw holes on the display-assembly base.
3. Replace the three screws (M2x2.5) that secure the fan to the display-assembly base.
4. Route the fan cable through the routing guides.
5. Connect the fan cable to the system board.
Post-requisites
Steps
1. Replace the
system-board
2. Replace the
back
cover.
3. Replace the stand.
computer. After working inside your computer, follow the instructions in
shield.
Replacing the fan
Replacing the fan
28
After
www.dell.com/
43