Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the stand.
2
Remove the
back
3
Remove the
system-board
Procedure
1
Disconnect the camera cable from the system board.
2
Remove the two screws (M3x5) that secure the retractable-camera assembly to
the display-assembly base.
3
Slide and lift the retractable-camera assembly out of the display-assembly base.
52
computer. After working inside your computer, follow
After working inside your
cover.
shield.
computer. For more safety best
www.dell.com/
Before