Camera; Removing Camera Module - Dell OptiPlex 7450 All-In-One Owner's Manual

k. SSD card
l. VESA mount bracket
m. optical drive
n. hard drive
o. cable cover
p. speaker
q. speaker cover
r. back cover
s. stand
5. Follow the procedure in

Camera

Removing camera module

1. Follow the procedure in
2. Remove the:
a. stand
b. optical drive
c. back cover
d. hard drive
e. system board shield
f. cable cover
g. memory module
h. coin cell battery
i. SSD card
j. WLAN card
k. heat sink
l. processor
m. system fan
n. OSD board
o. speaker
p. VESA mount bracket
q. system board
r. chassis frame
3. To remove camera module:
a. Remove the two M3.5x5 screws that secure the camera module [1].
b. Flip the camera module. [2].
c. Disconnect the camera cable to release the camera module [3].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly 47