Table of Contents
Advertisement
NOTE:
Note the location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W
(white).
Steps
1. Align the antenna modules (2) with the slots on the base panel and adhere it in place.
2. Adhere the copper foil that secures the antenna cables (2) to the base panel.
3. Replace the two screws (M2x2.5) that secure the antenna modules (2) to the base panel.
4. Route the antenna cables through the routing guides on the display-assembly base.
Next steps
1. Install the speakers.
2. Install the
wireless
card.
3. Install the
system-board
4. Install the stand.
5. Install the
bottom
cover.
6. Install the
back
cover.
7. Follow the procedure in
Camera
Removing the camera
Prerequisites
1. Follow the procedure in
2. Remove the
back
cover.
3. Remove the
bottom
cover.
4. Remove the stand.
5. Remove the
system-board
shield.
After working inside your
Before working inside your
shield.
computer.
computer.
Removing and installing components
41
Advertisement
Table of Contents
