NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
Procedure
Steps
1. Remove the four screws (M3x5 black) that secure the rubber feet to the display-assembly base.
2. Lift the rubber feet off the display-assembly base.
Removing the rubber feet
computer. After working inside your computer, follow the instructions in
After
www.dell.com/
Removing the rubber feet
37
57