Camera; Removing The Camera - Dell W24C Service Manual

NOTE: Note the location of the antenna modules printed on the display-assembly base as ANT-B (black) and ANT-W
(white).
Steps
1. Align the antenna modules (2) with the slots on the base panel and adhere it in place.
2. Adhere the copper foil that secures the antenna cables (2) to the base panel.
3. Replace the two screws (M2x2.5) that secure the antenna modules (2) to the base panel.
4. Route the antenna cables through the routing guides on the display-assembly base.
Next steps
1. Install the speakers.
2. Install the wireless card.
3. Install the system-board
4. Install the stand.
5. Install the bottom cover.
6. Install the back cover.
7. Follow the procedure in

Camera

Removing the camera

Prerequisites
1. Follow the procedure in
2. Remove the back cover.
3. Remove the bottom cover.
4. Remove the stand.
5. Remove the system-board
42 Removing and installing components
shield.
After working inside your
Before working inside your
shield.
computer.
computer.