NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Removing the coin-cell battery resets the BIOS setup program's settings to default. It is
recommended that you note the BIOS setup program's settings before removing the coin-cell battery.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Locate the coin-cell battery on the system board.
2. Press the tab on the coin-cell battery socket until the coin-cell battery pops up.
3. Lift the coin-cell battery out of the coin-cell battery socket.
Removing the coin-cell battery
computer. After working inside your computer, follow the instructions in
shield.
www.dell.com/
Removing the coin-cell battery
25
After
39