Pop-Up Camera; Removing The Pop-Up Camera - Dell W17C Service Manual

3. Install the following components:
a) System board shield
b) Back cover
c) Stand
4. Follow the procedure in

Pop-Up Camera

Removing the pop-up camera

1. Follow the procedure in
2. Remove the following components:
a) Stand
b) Back cover
c) System board shield
3. To remove the camera assembly:
a) Remove the two screws (M3x5) that secure the camera assembly cover to the middle frame [1].
b) Lift the camera assembly cover away from the middle frame [2].
c) Disconnect the camera cable from the system board and unroute the camera cable from the routing channel [3].
d) Remove the two screws (M3x5) that secure the pop-up camera assembly to the middle frame [4].
e) Slide and lift the pop-up camera assembly off the middle frame [5].
4. To remove the camera bezel:
a) Press the top of the pop-up camera assembly to extend the pop-up camera [1].
b) Remove the three screws (M3x5) that secure the bezel to the pop-up camera assembly [2].
After working inside your computer.
Before working inside your computer.
Removing and Installing components 45