NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
Steps
1. Disconnect the fan cable from the system board and remove it from the routing guides.
2. Remove the three screws (M2x2.5) that secure the fan to the display-assembly base.
3. Lift and slide the fan from under the heat sink.
42
Removing the fan
computer. After working inside your computer, follow the instructions in
shield.
Removing the fan
27
After
www.dell.com/