Standard Object Types Supported - Allen-Bradley PowerFlex 22-COMM-B User Manual

C-2 Protocol Implementation Conformance Statement (PICS)

Standard Object Types Supported

The table below lists the object types supported by the 22-COMM-B.
Dynamic object creation and deletion is not supported. The property
access rules use the following key:
R = Read Only: the property is supported for this object type
W = Read/Write: the property is supported for this object type
C = Commandable: the property is supported for this object type
Property
APDU Timeout
Application Software Version
Database Revision
Description
Device Address Binding
Event State
Firmware Revision
Location
Max APDU Length Accepted
Max Info Frames
Max Master
Model Name
Number of APDU Retries
Object Identifier
Object List
Object Name
Object Type
Out of Service
Polarity
Present Value
Priority Array
Protocol Object Types Supported
Protocol Revision
Protocol Services Supported
Protocol Version
Relinquish Default
Segmentation Supported
Status Flags
System Status
Units
Vendor Identifier
Vendor Name
(1)
This property will accept a maximum of 16 characters when written.
(2)
This property will accept a maximum of 32 characters when written.
(3)
This property will accept a value between 1 and 255 inclusive when written.
(4)
This property will accept a value between 0 and 127 inclusive when written.
(5)
This property is commandable for some instances of this object. Otherwise it is read/write.
(6)
This property is supported only for instances of this object where the Present Value property is commandable.
Analog Analog Analog
Input Output Value
R R R
R R R
R R R
R R R
R R R
R R R
R C C
R R
R R
R R R
R R R
Binary Binary
Input Output
R R
R R
R R
R R
R R
R R
R R
(5)
R C
(6)
R
(6)
R
R R
Binary
Device
Value
R
R
R
(1)
R W
R
R
R
(2)
W
R
(3)
W
(4)
W
R
R
R R
R
R R
R R
R
(5)
C
(6)
R
R
R
R
R
(6)
R
R
R
R
R
R