Learn More - Rimage DLN5200 Setup And Installation

7
Power on the DLN5200.
a. Set the switches to
the on position.
PC Power Switch
Main Power Switch

Note:The main power switch is used to apply power
to the entire system, while the PC power switch
applies power to the embedded PC. For more
details, refer to your user guide.
b. Press the PC power button to power on the system.
4
PC Power Button
8
Configure the DLN5200.
Important! Rimage recomends that your Network

Administrator use these instructions as a guide to
complete the configuration and software installation.
If you will submit jobs from other networked PCs, refer
to the Advanced Setup (Network) Guide.
If you connected a monitor, keyboard, and mouse, log into
the Rimage DLN5200 with the following username and
password:
Username: Adminstrator
Password: password
9
Activate your Rimage Software.
You have 30 days to activate your Rimage software.
Until your software is activated, you will be prompted to
activate your software each time you use the Rimage
software.
When the activation dialog displays, select an option and
follow the onscreen prompts to activate your software.
10

Learn more.

For information about submitting orders to the DLN5200
across a network, refer to the Advanced Setup (Network)
Guide.
For information about operating and maintaining the
DLN5200, refer to the DLN5200 User Guide included with
your product.
For additional support and product information, go to
www.rimage.com/support.html.
110769_H