Connect The Cables - Rimage DLN5200 Setup And Installation
Rimage dln5200: installation guide
Hide thumbs
Also See for DLN5200:
- User manual (27 pages) ,
- Replacement procedure (8 pages) ,
- Operator-parts list manual (6 pages)
Advertisement
4
Connect the cables.
5
Connect a monitor, mouse, and keyboard (optional).
a. Connect the mouse
to the embedded PC.
b. Connect the
keyboard to the
embedded PC.
c. Connect the monitor
to the embedded PC.
3
a. Be sure that the power switch is in the off
position.
b. Connect the power cord from the DLN5200 to
a power outlet.
Important! Do not power on the DLN5200
until you are instructed to do so.
Mouse
Keyboard
c. Connect the network cable to
the embedded PC.
6
Monitor
Install the front cover.
110769_H
Advertisement
