Label Design Requirements - Rimage Desktop 360i User Manual

Label design requirements

The Rimage 360i Windows compatible software includes a label editor called CD Designer™,
which is installed on your PC during a typical installation of the Rimage software. If you have a
Windows-based PC, you can use CD Designer to design your labels.
If you have another software application that you prefer, you can create a label and save it as an
®
Acrobat (.pdf) file, a .jpg file, or a .tiff file.
Important! Only the Adobe Acrobat (.pdf) file or CD Designer (.btw) file can print directly to
the Rimage 360i.
To create a label with another software application, use the following criteria:
•
Color Depth – Save the artwork for the label with the color set to millions of colors.
•
DPI – Use pictures or logos set to 300 DPI (dots per inch).
•
Label Design Size – A standard disc is 120mm (4.723"). The hole is 15mm (0.59"). The
printable area and hub sizes vary depending on the disc manufacturer.
Printable Area
118 mm
•
Media – The media that is in Rimage Media Kits™ has a hub area of 23 mm and a printable
area of 118 mm. On most labels, print settings of 24 mm and 118 mm are recommended.
110808_G
Hub Size
23 mm
Introduction
3