Rimage 360i
Operate the Rimage 360i
This section provides the information that you need to produce CDs or DVDs with the Rimage
360i.
Powering on the Rimage 360i
1. To power on the Rimage 360i, press the
power switch on the rear of the Rimage
360i. The Rimage 360i initializes.
2. To power off the Rimage 360i, press the
power switch again.
Pausing the Rimage 360i
Before you load or unload discs from the Rimage 360i, you must pause it.
1. To pause the Rimage 360i, press the pause button
once. The Rimage 360i pauses. The power indicator light
is amber.
2. To return to normal operation, press the pause button
again. The power indicator light is green.
8
110808_G