Trane TR200 Operating Instructions Manual page 22

ID Object_Name
Default Writeable EEPROM
name
BV:38 ECB Bypass –
Mode
BV:39 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:40 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:41 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:42 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:43 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:44 Reserved for ECB (MCO 104) - 3110 bit 4..10
BV:45 Reserved for ECB (MCO 104) - 3110 bit 4..10
Table 5. 7: Binary values
Multi-state Value Objects
ID Object_Name
Default name Parameter
MSV:0 Smart Logic Controller State
MSV:1 Active Setup
Real Time Clock Variable
The frequency converter has a built-in real-time clock. The standard real-time clock has no battery backup function, which will lead to a
loss of time if the drive is unpowered. Some BACnet managers can be programmed to send out the date and time as a time sync service
telegram on a regular basis. The BACnet Interface will update the real-time clock of the drive if it receives the time synchronization
telegram.
TR200 Embedded BACnet Operating Instructions
Present_Value
Param- Bit number Writeable
eter
– 3110 3
Present_Value
Bit number
1638
CTW
How to Control the Frequency Converter
Cmd.able EEPROM
– –
Writeable Cmd.able
n/a –
13 and 14 X
Time- Op-
out tion
– – MCO
104
– – –
– – –
– – –
– – –
– – –
– – –
– – –
Timeout
– –
X X
21