Ricoh AP600N Setup Manual page 81

❖ ❖ ❖ ❖ When connecting with IEEE 1394
• The printer must be connected to the IEEE 1394 connector of a computer
using the IEEE 1394 interface cable.
• [Activate] is selected in the SCSI print of IEEE 1394 and [Activate] is selected
in the Bidi-SCSI print.
• Under Windows 2000/Windows XP/Server 2003 and Windows NT 4.0,
[Enable bidirectional support] must be selected and [Enable printer pooling]
must not be selected on the [port] tab with RPCS printer driver.
❖ ❖ ❖ ❖ When connecting with USB
The printer must be connected to the USB connector of a computer using the
USB interface cable.
- - Cautions when connecting the USB interface cable and the IEEE
- -
1394 interface cable
Limitation
❒ Do not unplug the cable while printing. Do not turn off the printer power
while printing or during bidirectional transmission.
Installing the PostScript Printer Driver
4
77