Hard Disk Drive Type 2600 - Ricoh AP600N Setup Manual

Hard Disk Drive Type 2600

Important
❒ Before touching the Hard Disk
Drive, touch something metal to
discharge any static electricity.
Static electricity can damage the
Hard Disk Drive.
A A A A
Check the contents of the box for
the following items:
• Hard Disk Drive
• Installation Guide
B B B B
Be sure to check the following
points:
• The power switch is turned off.
• The interface cable is un-
plugged from the printer.
C C C C
Remove the two screws and the
cover of the Hard Disk Drive
mounting bracket.
Note
❒ Use a coin or similar object if the
screws do not turn easily.
❒ The screws and cover are not
used when installing the Hard
Disk Drive.
D D D D
Slowly insert the Hard Disk
Drive while aligning it with the
top and bottom rails in the printer
until it stops.
E E E E
Fasten the two screws (using a
coin, etc.) to fix the Hard Disk
Drive.
F F F F
Attach the interface cable to the
printer.
G G G G
Plug the printer's power cord
back into the wall outlet, and then
turn on the power switch.
ZKGX350E
Hard Disk Drive Type 2600
ZKGX151E
ZKGX360E
2
41