Ricoh AP600N Setup Manual page 40

Installing Options
P P P P
While aligning the power cord to
the left side groove of the Duplex
Unit, slide the Duplex Unit in un-
til it is connected to the printer.
2
Q Q Q Q
Plug the printer's power cord
back into the wall outlet, and then
turn on the power switch.
Note
❒ After installing the last option
that you want, print the config-
uration page to confirm the in-
stallation. If the new device is
listed in the column of configu-
ration options, then it has been
properly installed. For more in-
formation about printing the
configuration page, see "Print-
ing the Configuration Page" in the
Printer Reference on the CD-
ROM labeled "Operating In-
structions".
❒ If the 802.11b interface unit is
not installed properly, repeat
the procedure from step
you cannot install it properly
even after reinstallation, contact
your sales or service representa-
tive.
❒ You need to make settings with
the control panel before using
the 802.11b Interface Unit.⇒
p.57 "IEEE 802.11b (Wireless
LAN) Configuration"
36
ZKGX243E
B
. If