Message List; System Log Information - Ricoh 480W Network Manual

Monitoring and Configuring the Machine

Message List

This is a list of messages that appear in the machine's system log. The system log
can be viewed using the "syslog" command.

System Log Information

Use the following command to display the system log information:
• UNIX: Use the "syslog" command and "rsh", "rcp", and "ftp" parameters.
3
• telnet : Use the "syslog" command.
Message
ANONYMOUS FTP LOGIN FROM <IP ad-
dress>, <password>
Change IP address from DHCP Server.
child process exec error! (process name)
Connected DHCP Server(<DHCP server ad-
dress>).
connection from <IP address>
Current Interface Speed:xxxMbps
Current IP address <current IP address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
Duplicate IP=<IP address>(from <MAC ad-
dress>).
httpd start.
inetd start.
LeaseTime=<lease time>(sec), Renew-
Time=<renew time>(sec).
64
Problem and solutions
An anonymous login has been made with a
password <password> from the host <IP ad-
dress>.
The IP address changes when DHCP lease is re-
newed. To always assign the same IP address,
set a static IP address to the DHCP server.
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
The IP address was successfully received from
the DHCP server.
Login was from the host IP address.
Speed of the network (10 Mbps or 100 Mbps)
The IP address <current IP address> was re-
ceived from the dhcp server.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
The DHCP server was not found. Make sure
that the DHCP is on the network.
The DHCPCD service (dhcp client service) has
started.
The same IP address is used. Each IP address
must be unique. Check the address of the de-
vice indicated in [MAC address].
The httpd service has started.
The inetd service has started.
The resource lease time received from the
DHCP server is displayed in [lease time] in
seconds. The renewal time is displayed in [re-
new time] in seconds.