Searching For A Destination In The Ldap Server - Ricoh Aficio MP161 Scanner Reference

Sending Scan Files by E-mail

Searching for a Destination in the LDAP Server

You can search the LDAP server for an address and then specify that address as
an e-mail destination.
1
Important
❒ To use this function, you must connect an LDAP server to the network.
❒ It is necessary to register the LDAP server under [System Settings]. Also, set
[LDAP Search] to [On] under [System Settings]. For details, see "General Settings
Guide".
A
Press the {Search Destination} key.
The illustration is an example. The actual appearance may be different.
B
Select [Search LDAP], and then press the {OK} key.
C
Select [Select Server], and then press the {OK} key.
D
Select the server, and then press the {OK} key.
If authentication is required to access the server, the authentication screen ap-
pears. Enter the user name and password correctly.
The Search LDAP screen reappears.
22
ZZZ610S