Installing Twain Driver From Provided Cd-Rom - Ricoh Aficio MP161 Scanner Reference

Using the Network TWAIN Scanner Function

Installing TWAIN Driver from Provided CD-ROM

This section explains how to install the TWAIN driver on a client computer from
the supplied "Scanner Driver and Utilities" CD-ROM.
To use the network TWAIN scanner, you must install the TWAIN driver on a cli-
ent computer.
To use the TWAIN scanner function, you need to install the TWAIN driver on
the client computer.
A
Start Windows, and then insert the CD-ROM labeled "Scanner Driver and
Utilities" into the CD-ROM drive of the client computer.
The installer is automatically started and the [Scanner Driver and Utilities] dialog
box appears.
4
B
Click [TWAIN Driver].
C
The installer of the TWAIN Driver starts. Follow the instructions.
Note
❒ Before you start the installation, check the system requirements for the
TWAIN driver. For details about the system requirements, see "Software
Supplied on CD-ROM".
❒ You can install the software using the auto-run program. For details about
the auto-run program, see "Auto-Run Program".
❒ If the installer does not start automatically, see "Auto-Run Program".
❒ When the installation is complete, a message about restarting the client
computer may appear. In this case, restart the client computer.
❒ After the installation is complete, a folder with the name of the machine in
use is created in [Programs] or [All Programs] on the [Start] menu. You can
display Help from here.
❒ Notes on using the network TWAIN scanner are provided in Readme.txt.
Be sure to read them before use.
Reference
p.112 "Software Supplied on CD-ROM"
p.112 "Auto-Run Program"
86