Searching For A Destination In The Ldap Server - Ricoh mpc1500sp Operating Instructions Manual

Searching for a Destination in the LDAP Server

By accessing an LDAP server, you can search for destinations and select them.
Important
❒ To use this function, you must connect an LDAP server to the network. In ad-
dition, under [System Settings], you must register the server and set [LDAP
Search] to [On]. For details, see Network Guide.
A
Press {Search Destination}.
B
Select [Search LDAP], and then press {OK}.
C
Select [Select Server], and then press {OK}.
D
Select the server, and then press {OK}.
If authentication is required to access the server, the authentication screen ap-
pears. Enter the user name and password correctly.
The Search LDAP screen reappears.
ALO010S
Specifying Destination
21
1